The Z28 camaro.

woo! somebody know's florida!
i live next to the most famous beach in the world!
new smryna beach and daytona! but alot closer to nsb!
its dirrectly east of orlando in volusia county.
if you go on google maps they have alot of 3d things on there now.
type in 755 indian harbor av. oak hill florida 32759 and you can
look around! lol.

ohh and i got tranny lines todayyyy.
so i can run my engine without breaking stuffff.
ima make a video tomorrow if i get gas =] and if i get tranny fluid. need like 2 or 3 more quarts.

Cool we can test out the video feature on here!

i got a vid, but i gotta upload it. not sure on how im going to do it. my computer is really picky about stuff like that.

Ok I will get you directions from your home to Biloxi to see how far it is !

755 indian harbor ave. oak hill florida. 32759

that equals too far!! lol.

Estimated Time: 8 hours 53 minutes Estimated Distance: 585.28 miles

im actually wanting to take a trip upstate here soon, im not sure where i wanna go tho. kinda looking into north/south carolina. i've never left florida and i wanna see mountains! lol.

oh, and i just sold my ktm 250sx so my car will be done tomorrow! wooooo. ill take lots of pictures while installing the new stuff.

And by done you actually mean driveable. You know you'll never be truly DONE.

EXACTLY! lol.

i got everything to get it done today. but the driveshaft i got is the same one that i had! so i gotta take it back and hope they have a 52" driveshaft! and if i cant find one then im going to have to get one custom built or move my motor back 4 inches which also means moving my firewall back 4 inches! lol.

I think it will be easier to have the driveshaft made. Just a hunch.

yeah, we'd have to wire up the big lathe tho, because the driveshaft wouldnt fit on the small one. then chop it, weld it, and balance it. or have it taken to a machine shop and put a longer tube on it.

YEah I seen them do it on tv just change out the tube?

yeah, its no biggy just getting a tube to do it.

my welding rods are crappy, and i think the 220 welder might burn through it. alot of people dont really relize how thin a driveshaft really is! lol

YEah I would not know but I did break one driving a 18 wheeler in Pennsylvanna! a long time back!

They don't have to be thick because they're not subjected to shear stress. All they do is spin. There I go gettin all technical, I guess that's the aircraft mechanic in me coming out.

the one on the semi broke at the connection point!

yeah, the U joints are the weakest point on a driveshaft. then you got the spline on a 700r4 thats aluminum! (from what i hear) thats why i bought a TH350.

i also hear aluminum driveshafts are actually stronger.
what do you guys think? true? or false?


and i'd say a 18 wheeler is under a bit of stress! thats why they have two driveshafts with two differentials! i had to put tires on one before, talk about fun. spray it full of ether and light er up.. BOOM!!!! its on the rim, then put air to it to put the fire out inside =P

hey, if i move the motor back 4 inches it will pull a wheelie easier! well a little bit! haha. i doubt 4 inches would make a difference tho..

put some new pictures up on the cardomain site.

http://www.cardomain.com/ride/3184439/5

Sweet man great job! You could have posted them here too if you like!

i deffinatly will, but i've been busy and havent been on but 10 minutes at a time. havent really gotten around to it.

Take your time we are not going anywhere!

I hope we aren't going anywhere.