the mazdawg

small update.

got the box wired up in the truck. i will be baggin the front not this weekend but next. looks like i might make my deadline for pandemonium (fingers crossed)



i have a center console i want to build that will work with this switchbox as well as another one i will get built way down the road.

Good luck and as always bring back photos from pandemonium@

How's this thing coming?

its coming.

start on the front early in the am. when i get off tonight im gonna go pick up the plasma cutter again and pull the truck into the shop. but knowing me i will prolly work on it until i can't go anymore. cause im so excited to do this

Good luck on finishing and be sure to take plenty of pics.

well the front is done.

just needs to be tubbed. goin to get pics up asap. i have work tonight and im so exhausted! it literally took me all weekend to do.

So does that mean your taking it to work?? I still never tubbed mine either. i probably won't until i park it. Theres too much stuff underneath that hood!! Probably won't be bad for you though.

yea larry. it wont take much.

here is a link to the pics not all up yet and i haven't started on gettin them in photobucket

http://viewmorepics.myspace.com/index.cfm?fuseaction=user.viewPicture&friendID=25850388&albumId=2642495

new girl is cute congrats!!!

Truck looks great too.... So impressed!

Jeffro wrote:

new girl is cute congrats!!!

Truck looks great too.... So impressed!

lmao. thanks

here is a few pics

yeah more pictures!!!

So when do you think it will be rollin again!!!

Jeffro wrote:

yeah more pictures!!!

So when do you think it will be rollin again!!!

its rollin. i will be tearing it down in about two or three weeks to do the back. can't get pics today cause its rainin

here is a quick pic of the truck

i have to say, you've done a number to that truck since you've got it! to see what it used to be, and what it is now. just awsome. your doing a great job!
did you have to cut out ur wheel wells any? and do your tires rub?

michanic220 wrote:

i have to say, you've done a number to that truck since you've got it! to see what it used to be, and what it is now. just awsome. your doing a great job!
did you have to cut out ur wheel wells any? and do your tires rub?

thanks man.

yea its been along way.

it sits on the fenderwells right now. im relocating stuff in the engine bay right now to start tubbin it.

i jack trucks up.
so im new with lowering them!!
i dont exactly know what "tubing it" is.
so you guys might have to walk me through it!!

michanic220 wrote:

i jack trucks up.
so im new with lowering them!!
i dont exactly know what "tubing it" is.
so you guys might have to walk me through it!!

ok here you go.

tubin is when you remove the fenderwells for clearance to allow it to go lower and let the frame touch the ground. im cutting them out and coming back with some trailer fenders and welding them back in once the truck can lay the frame on the ground

ohh ok, i gotcha now.

YOUR MY HERO!!!!

Jeffro wrote:

YOUR MY HERO!!!!

thanks.

small update. i have the driver side fenderwell cut out and started the passenger side. ive been so busy. leaving for a national electronics competition in Kansas City, Missouri sunday and coming back the following sat. when i get back i should be tearing the truck back down to finish bagging the back! i just need some valves and ill have all the parts.

thats awsome man. im on www.c10forum.com and 90% of the c10's are dropped and bagged. im like you guys arent going to hate me for jacking mine up right?? lmao.

I wont hate, love anyone who does anything to there vehical

Jeffro wrote:

I wont hate, love anyone who does anything to there vehical

couldnt have said it betta.

everyone has there own taste. as long as the work is done right and safely then you have ma full respect.

Since when you have to do it Safely? The fun is bleeding during ever project!!! As Long as it is a project!